Calls answered around the clock · connections 7 AM–7 PM Call (707) 418-4772How it works

Fall furnace checklist

Ten minutes in October prevents most first-cold-night calls.

Referral line: your call is routed to a participating local heating & cooling company. How it works

Replacing the furnace filter in autumn before heating season
Short answer: In October, before the first cold front: replace the filter, switch the thermostat to Heat and confirm the inducer, igniter and burners start in sequence, let it run 15 minutes, test carbon monoxide alarms, and clear storage away from the furnace. Call for service if anything fails, before every company is busy.

The checklist

  1. Replace the filter.
  2. Thermostat to Heat, 3°F above room temperature.
  3. Listen: inducer fan, then igniter glow, then burners, then the blower.
  4. Run 15 minutes. A dusty smell that fades is normal.
  5. Test carbon monoxide and smoke alarms.
  6. Clear the furnace closet or garage area; don't block louvers.
  7. Heat pump homes: confirm warm air in heat mode and that the outdoor unit runs.

Why October

January lows average around 40°F in Fairfield and Vacaville, and Nut Tree Airport averages about 21 freezing nights a year (NOAA). Furnaces sit idle from spring to late fall, so flame sensors and igniters often fail on the first cold weekend, when every company in the county is busy.

Book a professional check if

  • The furnace is over 15 years old.
  • It clicked, boomed, short-cycled or smelled unusual last winter.
  • Anyone has had headaches that ease outside the house.
A technician rinsing the fins of an outdoor condenser with a garden hose on a spring morning
A technician rinsing the fins of an outdoor condenser with a garden hose on a spring morning

Heat pump version of the checklist

  1. Switch to Heat and confirm warm air within a few minutes.
  2. Watch for the outdoor unit to run.
  3. Clear leaves from around the unit and make sure gutters don't drip on it.
  4. Learn what a defrost cycle sounds like so it doesn't surprise you on the first foggy morning.

Boiler version of the checklist

  1. Check the pressure gauge is in the normal range.
  2. Turn on the heat and confirm every radiator warms.
  3. Bleed radiators that stay cold at the top.
  4. Book annual service if it hasn't been done.
Questions

Common questions

When is the first cold snap in Solano County?

Usually November, when overnight lows start dropping into the 30s inland.

Need heating or AC help in Solano County?

Tell the dispatcher what the system is doing and where you are. You'll be connected with a participating local heating & cooling company that serves your ZIP code.

📞 Call (707) 418-4772

Referral line: your call is routed to a participating local heating & cooling company. How it works

📞 Call (707) 418-4772 · heating & AC help