How it works
A boiler heats water and a circulator pump moves it through pipes to radiators or baseboard. An expansion tank and relief valve manage pressure, and air vents release trapped air.
Common problems
| Symptom | Likely cause |
|---|---|
| All radiators cold | Boiler not firing, pump failed, low pressure |
| Some radiators cold at the top | Air in the system; bleed them |
| Banging or knocking | Air, scale, or water hammer |
| Water at the relief valve | Pressure too high; expansion tank problem |
Where you'll find them
Vallejo has the oldest housing of the cities around here (median build year 1975, Census ACS), and Benicia's historic districts include older homes. Most homes in Fairfield, Vacaville and Suisun City use forced air instead.

Bleeding a radiator safely
- Turn the heat off and let radiators cool.
- Hold a rag under the bleed valve at the top corner.
- Open it a quarter turn with a radiator key until air hisses out and water appears, then close it.
- Check the boiler pressure gauge; if it dropped below the normal range, call a technician to add water.
Annual boiler service
Boilers need yearly checks of the burner, venting, relief valve, expansion tank and pump. Older systems may also need water treatment to limit sludge. Ask whether the technician services hydronic systems before booking; not every HVAC company does.
Sources
Last reviewed 2026-11-12 by the RD Heat & Air editorial team. Editorial policy.


