Thaw it the right way
- Set the thermostat to Off and the fan to On. The blower will melt the ice faster.
- Put towels around the indoor unit; a lot of water may come out at once.
- Wait until all ice is gone, usually 2 to 4 hours.
- Replace the filter before turning cooling back on.
Don't chip ice or use a heat gun. You can puncture the coil.
Why it froze
- Dirty filter or blocked return: the most common cause.
- Closed supply vents: closing too many rooms starves the coil of air.
- Blower problem: a weak capacitor or motor moves too little air.
- Low refrigerant: a leak drops the coil temperature below freezing.
- Dirty indoor coil: years of dust on the coil blocks airflow.
- Cool nights: running the AC when it's mild outside, as on Fairfield's Delta breeze evenings, makes a marginal system more likely to ice.
After it thaws
If it cools normally for a day or two with a new filter, the filter was likely the cause. If ice comes back, the problem is refrigerant or the blower, which needs a technician. Mention the freezing when you call so they bring leak-search equipment.
Stop and call if
you smell gas or burning plastic, see scorch marks or sparks, a carbon monoxide alarm sounds, or a breaker trips a second time. For gas or CO: leave the house and call 9-1-1, then PG&E at 1-800-743-5000.


